Skip to content Skip to sidebar Skip to footer

Double pad sander, straight line sander, rubbing machine for wood finishing

Double pad sander sanding machine is very useful tool to do the sanding process in the finishing process. The double pad sanding machine works in a different way with the orbital sander and palm pad sander. The machine has two sanding pads as place to attach the sandpaper. The double pad is moving forward and backward while it work. With its forward and backward motion he produces a more smooth and even surface with more consistent sanding mark according to the movement of the pad sander. The sanding result will appear flatter and more consistent.
This sanding machine is available in 3 sizes: the 6 lbs, 7.5 lbs and 30 lbs.

30 lbs double sanding machine

The 30 lbs size machine is more widely used in the rubbing process.  This machine is used to sand the coating film in the first rubbing process. The # 800 grade sandpaper of finer is attached to the pad and used to sand the dry film surface. The machine can do a consistent sanding to obtain a smooth and flat surface. The result obtained is a flat and smooth film surface with consistent sanding. The sanding marks which can be less visible since it is camouflaged with the wood grain pattern.  
The sanding machine can also be fitted with a scotch brite to be used in compounds applications. When the machine is operated the scotch brite will rub the surface and do compounding with more consistent. The rubbing with compound will make a higher sheen on the surface. Because it most frequent uses in the rubbing process, this machine is also well known as the rubbing machine. 

 15 lbs sanding double pad  machine

The machine with a smaller size is more used to do sanding between clear coating applications. Sealer or top coat can be sanded with 7.5 lbs or smaller size double pad sanding machine with best result. It will produce a flat and smooth surface with consistent sanding mark as the bigger machine.
This machine has less aggressiveness compared with the orbital sander or palm sander. This machine also has relatively more expensive price compared with the palm sander or orbital sander. Therefore it is more widely used machine for sanding the layers of clear coating especially when we want a high gloss finish. 

Tips on using the double pad sanding machine:
  •  Use the appropriate sandpaper.
This machine is tool to help move the sandpaper. The sanding quality will be largely determined by the proper uses the sandpaper. Use proper and good quality of sandpaper accordingly to the finishing step. To sand the sealer or top coat between clear coat applications, use sandpaper with grade # 280 or 320. For sanding the film layer on the first rubbing process use sand paper with # 800, # 1200, or higher grade. We can use a wet sanding by using liquid as a sanding lubricant and heat absorbent in the sanding process.
  •  We need some time to exercise and get use with this machine.
Put and attached the sandpaper on both of his pad. We can put some sandpaper layer on each pad. Make sure we put the same amount sandpaper on the each side of pad sander to make sure the sanding machine has even surface. Put the machine on the coating surface and turn on the machine. Move the tool consistently with the stroke direction according to the wood grain pattern. The pad will move stroke forward and backward according to the grain pattern. The pad movement will result a consistent sanding.
Don’t press the machine too much. The machine has a weight that can provide enough pressure for the sanding process. Just feel the movement and direct the machine to do the sanding.
Make sure the enough air pressure is available to run this machine. This machine is air pressure powered machine. See the specification of the air pressure and the volume needed. Make sure we can provide the compressed air needed.
  • Maintenance to the double pad sander.
This sanding machine requires proper maintenance to keep it works well. Always clean the machine after it is used. Check the machine and give oil to lubricate the motor regularly. Keep the machine by put this machine on a flat surface to keep his surface flat. The uneven pad surface will result in uneven sanding.
 

13 comments for "Double pad sander, straight line sander, rubbing machine for wood finishing"

  1. Pak Wisnu,

    Mohon informasinya mengenai merk dari 30 lbs double sanding machine diatas.

    best regards,
    Candra

    ReplyDelete
    Replies
    1. Pak Candra.
      mesin itu biasanya merknya stuhr.

      kalau Bapak ingin tahu lebih lanjut coba hubungi kami lewat: contact us
      http://www.wisnofurniturefinishing.com/2009/09/furniture-finishing-forum.html
      nanti informasi bisa kami kirim lewat email.

      Terima kasih

      Delete
  2. This is such a great idea! simple and beautiful, very inspiring!
    CNC Router Parts

    ReplyDelete
    Replies
    1. Thanks for visit us.

      Good Bless You

      Delete
    2. Hi Sir,
      Do you know where can buy 30 lbs double sanding machine?
      I am Bac from 3M Viet Nam and I need this machine urgent
      If you have any information, please give me to my email - bac.le@phuockhang.com
      Thanks and Best regards!

      Delete
    3. You will have to search auctions. The 30 lbs Stuhr is no longer made.

      Delete
    4. I got mine on eBay at a rare low price of $110 USD. They usually auction for more than $900 USD. Check eBay frequently.

      Delete
  3. Sturh is discontinued. Very sad news.

    ReplyDelete
  4. Such a shame this power tool is no longer available in the market. I tried looking for deals on eBay and Gumtree but can't find anybody willing to sell it.

    ReplyDelete
  5. http://www.dynabrade.com/pdf/lit/D17-05.pdf
    Cheers!

    ReplyDelete
  6. Since the utilization of electric sander has expanded fundamentally so you can undoubtedly get diverse assortment of electric sander in the market. The diverse assortments of electric sanders accessible in the market influences the general population to befuddle about the sort to purchase among such huge numbers of assortments of models accessible. I find a very good website for the best palm sanders, If you want you can visit this site.

    ReplyDelete
    Replies
    1. No electric sander will match a dual pad pneumatic sander. Black & Decker, and also Sears used to make straight line sanders. Not even close to what a Stuhr, National-Detroit, or Sundstrand rubbing machine can do. In the car autobody industry you can get air files. These are straight-line sanders but the sanding pads are very narrow and not nearly - by a longshot! - as useful as a dual pad in-line sander.

      Delete